Fast Actuators Linear

The actuator body is fixed inside the cabinet door profile, and the telescopic rod is linked to the latch bolt. A single control board runs the whole compartment:

The user enters a pickup code, scans a card or completes payment, and the board applies 5V DC to the actuator's two leads.

The motor turns, and the internal screw converts that rotation into a slow, even linear stroke. The rod extends the 10mm needed to clear the strike plate, and the door swings open.

The built-in limit protector stops the drive at the end of the stroke, so the actuator cannot over-travel and the motor cannot be damaged by stalling. No external travel switch and no position programming are required.

Once the compartment is closed again, the board reverses the polarity. The rod retracts to its rest position, and the latch is locked.

When the power is off - after a transaction, overnight, or when the cabinet is unplugged - the screw drive holds the bolt in place up to the rated 10KG self-locking force. The locked state does not depend on electricity, so the most expensive failure mode of a storage cabinet, a door that springs open when the power fails, is designed out.

The model number carries three pieces of information: the series (KT0905), the stroke in millimetres (10), and the version letter (H for the fast version, L for the thrust version).

The KT0905 series is produced by the electric actuator division that KABASI established in 2021, alongside the company's industrial electrical business that has been running since 2015. Production uses Swiss-type lathes, electric press machines and dedicated micro-motor test equipment, and finished actuators are checked before packing on a range of instruments - DC low-resistance testers, wire bending test machines, quadratic element measuring instruments, insertion and extraction force testers, insulation resistance testers and salt spray testing machines. The instruments themselves are shown on our testing equipment page, and the production base is described under about us.

The company operates an ISO9001:2015 quality management system, holds CE, RoHS, CCC and TUV certification for its products and more than 30 national patents, and exports to 60 countries and regions. The scanned certificates - product and business management certifications, utility model patents and industry qualification recognitions - are published on the certification page, and warranty and after-sales terms are set out under why choose KABASI. For projects that need a different stroke, force, speed or fixing arrangement, send the mechanism drawing and we will confirm what can be built.