Built-in Limit Switch Linear Actuator

Built-in Limit Switch Linear Actuator

Built-in limit switch linear actuator KT1359 is the model in our miniature range built for guards, flaps and access covers that only have to stop at two fixed positions. All eight strokes run on 12 V DC, and each stroke comes in two force versions: 30 N (3 kg) at 30 mm/s no-load and 18 mm/s full-load, or 80 N (8 kg) at 8 mm/s no-load and 5 mm/s full-load. Both stop automatically at each end of travel and are rated for 10% duty. Materials match a dry indoor environment: stainless steel front ear and guide sleeve, aluminium outer tube, nylon housing, copper alloy in the drive. The end positions are handled inside the tube, so the cover frame needs no limit board and no clearance for one. The service environment is dry and indoor: weighing, printing, test jig and display equipment.
Model:KT1359
Voltage:DC12V
Stroke:10/15/20/25/30/50/75/100mm
Send Inquiry
Product Introduction

Products Description

 

Built-in limit switch linear actuator KT1359 handles both end positions inside its own tube. When the rod reaches full retraction or full extension, the internal mechanical limit cuts the motor, and the cover it drives stops in the same place on every cycle.

Stroke sets the size first; force sets which version. The 30 N version runs at 30 mm/s no-load and 18 mm/s full-load, which suits a light acrylic or polycarbonate flap that has to open in about a second. The 80 N version runs at 8 mm/s no-load and 5 mm/s full-load, which suits an aluminium guard, a hinged lid carrying instruments or wiring, or any cover where closing force matters more than speed.

The two ends are the stainless front ear and the aluminium tube. Once mounted, the rod travels in a straight line and carries no side load.

 

Specifications

 

Item KT1359
Type Miniature electric linear actuator, built-in limit
Model KT1359
Rated voltage 12 V DC
Standard strokes 10 / 15 / 20 / 25 / 30 / 50 / 75 / 100 mm
Outer tube diameter 13.5 mm
Inner rod diameter 9 mm
30 N version 3 kg (30 N), 30 mm/s no-load, 18 mm/s full-load
80 N version 8 kg (80 N), 8 mm/s no-load, 5 mm/s full-load
End-of-travel protection Built-in mechanical limit, auto stop at both ends
Self-locking force Greater than the rated pull force
Duty cycle 10%
Operating temperature -20℃ to 65℃
Front ear / guide sleeve Stainless steel
Outer tube Aluminium
Housing Nylon
Drive components Copper alloy

 

Application Fields

 

  • Weighing and metering equipment. Draft shields and sliding doors on bench scales, price-computing scales and weighing terminals. Short strokes, repeatable stop position.
  • Office and printing equipment. Media lids and hatches on label printers and desktop terminals. Light covers, frequent opening.
  • Test jigs and production line equipment. Probe guard doors and packaging machine flap gates. Stop on arrival without using space inside the frame.
  • Commercial and display equipment. Coffee machine hopper slides and display case glass hood lifts. Thin frames, two positions only.

 

Typical devices for each stroke are listed in the selection table below. Stroke comes from the opening height: a short step to crack open, a long step to move clear. Laboratory and inspection instrument cases are under laboratory equipment actuators; other devices are on our applications page.

 

Built-in Limit vs External limit protection Board

Micro Linear Actuator 50 mm Stroke
01.

External limit protection Board

An actuator with an external limit board adds a board outside the tube, and that board does two jobs: end-of-travel stop and overload protection. The cost is space - the board sits outside the tube, the cover frame has to carry two switch positions, and assembly gains a fixing step.

02.

Built-in Limit

Built-in limit KT1359 has a mechanical limit only: the motor is cut at both ends, and there is no overload protection. What it saves is space - the mechanism sits inside the tube, the internal clearance of the cover stays as designed, and one or two assembly steps drop out.

product-2048-2048

 

Selection by Stroke

 

Stroke 30 N version, no-load / full-load 80 N version, no-load / full-load
10 mm 0.3 s / 0.6 s 1.3 s / 2.0 s
15 mm 0.5 s / 0.8 s 1.9 s / 3.0 s
20 mm 0.7 s / 1.1 s 2.5 s / 4.0 s
25 mm 0.8 s / 1.4 s 3.1 s / 5.0 s
30 mm 1.0 s / 1.7 s 3.8 s / 6.0 s
50 mm 1.7 s / 2.8 s 6.3 s / 10.0 s
75 mm 2.5 s / 4.2 s 9.4 s / 15.0 s
100 mm 3.3 s / 5.6 s 12.5 s / 20.0 s

 

Force is estimated as a moment: force ≈ cover weight x centre-of-gravity distance to the hinge / perpendicular distance from the hinge to the actuator. A 1 kg flap with its centre of gravity 150 mm from the hinge, driven 100 mm from the hinge, needs about 15 N, which leaves the 30 N version a 2x margin; the same geometry at 2 kg needs 30 N and is carried by the 80 N version. Most devices in the table are covers of about 1 kg, so either version drives them and the choice comes down to speed and closing force.

 

Cycle Time and 10% Duty

 

A 10% duty cycle means powered running time is at most one tenth of the full cycle. Take the 80 N version at 100 mm and 20 s full-load: the full cycle must be at least 200 s, so 180 s of rest sits between two movements. The 30 N version moves in about a second, which leaves more duty headroom, but continuous reciprocation is still outside the rating.

Auto stop at both ends helps the cycle calculation: while the cover sits open or closed the motor is already cut, so that dwell counts as off-time. Open, pause, close, pause fits inside the 10% duty cycle; back-and-forth without a pause does not.

 

Factory, Testing and Certification

 

A functional test is carried out before packing; the benches used for those checks are listed under testing equipment. The quality system is ISO 9001:2015 and the product carries CE, RoHS, CCC and TUV, shown on our certification page.

Company and inspection capability are on about us and why us.

 

frequently answer question 

product-569-330

01.Does KT1359 need an external limit board?

 No, provided the protection scope fits. Both end positions are cut by the mechanical limit inside the tube, so the cover frame carries no board and no switch brackets; that cut is mechanical, works only at the two ends, and gives no overload protection.

02.What happens if the cover is blocked mid-stroke?

 The built-in limit is mechanical, acts only at full retraction and full extension, and gives no overload protection. An obstruction partway through travel is not detected, so the cover must not be used as a clamp or a pinch point.

03.30N or 80N?

 By cover weight and permitted closing speed. The 30 N version runs 30 mm/s no-load and 18 mm/s full-load and brings a light flap through a short stroke in about a second. The 80 N version runs 8 mm/s no-load and 5 mm/s full-load for aluminium guards or lids carrying instruments and wiring.

04.Can it reciprocate continuously inside a test cycle?

 No. Duty cycle is 10%: with the 80 N version at 100 mm and 20 s full-load, the full cycle must be at least 200 s. The motor is cut while the cover dwells open or closed, but continuous back-and-forth is outside the rated range.

05.Which strokes are standard?

 10, 15, 20, 25, 30, 50, 75 and 100 mm, all eight available in both force versions.
Is 12 V the only rating? Both versions are 12 V DC.

 

Ordering

 

Send the request through contact. Please include: stroke, version (30 N or 80 N), quantity, and the date you need the first batch. Attach the mounting drawing if you want the fit checked.

 

 

Hot Tags: built-in limit switch linear actuator, China built-in limit switch linear actuator manufacturers, suppliers, factory, electromagnetic linear actuator, lifting column, low friction pneumatic cylinder, small hydraulic actuator, telescopic pneumatic cylinder, toyo actuator

Send Inquiry

whatsapp

Phone

E-mail

Inquiry